On average the cost of a roof inspection is around $260 in 2022. For a typical roof inspection, you can expect the cost to be somewhere from $120 to $400.
There are several reasons why homeowners would require a roof inspection. It could be to find where a roof leak is coming from, for a simple inspection to find out how your roof system is functioning, or to get an estimate for a new roofing system.
Whatever the reason, you most likely have one question about a roof inspection, what is the cost.
This post begins by going straight into how much a roof inspection is going to cost. After that, it is going to follow up with six things that every roofing contractor needs to look for throughout their roof inspection.
How much is a roof inspection going to cost?
Like everything cost-associated in the roofing industry, it’s impossible to provide a precise cost for roof inspections. Each roofing contractor is going to be different, so the cost is going to differ from company to company.
On average the cost of a roof inspection is around $260 in 2022 For a typical roof inspection, you can expect the cost to be somewhere from $120 to $400.
Six things a roofing contractor is going to look for throughout their roof inspection
Now there is an idea of how much a roof inspection is going to cost. Don’t forget, every roofing contractor’s inspection cost is going to be different.
However, there is one thing that each roofing contractor needs to have in common, what they look for throughout their roof inspection. Below are six things a roof inspector is going to look at.
Adequate attic ventilation and the state of your roof vents
One of the initial things a roofing inspector needs to check throughout their inspection is the ventilation of your attic.
They are going to also inspect the physical vents of the roof, as well.
The number of layers your roof has (only asphalt shingles)
If you are like a lot of homeowners, you most likely have an asphalt shingle roof. When you have a different type of roof system, this might not apply to your roof.
When your contractor initially gets on your asphalt shingle roof for their inspection, the are going to check the number of layers of shingles you roof has. If they discover more than one layer, the roof replacement quote is going to include the number of layers that will need to be removed.
You might be wondering why roofs would have more than one layer. But a lot of homeowners decide to reduce costs by bypassing the removal process and nailing over the present asphalt shingles.
Subject to how old your home is, you might even see some roofs with 3 or more layers. Just remember the more layers that are required to be removed increases the labor and debris removal cost for your roof replacement.
The state of your roof decking (sheathing)
The roof decking (also known as roof sheathing) is the foundation that supports your entire roof system. Due to this, it’s absolutely vital that any rotted or damaged decking be replaced.
The reason why a roofing contractor needs to always inspect the roofs decking.
When they discover the roof decking’s integrity is weakened, the boards and/or planks are going need to be replaced throughout the roof replacement process. Remember that replacing roof decking is going to increase the cost of a new roof.
How much life your roofing materials has remaining
Throughout an inspection, the roofing contractor is going to check out the state of your roof and establish if it’s time to replace your roof.
The state of your roof’s penetrations
Roof penetrations are anything that sticks out of your roof. When the contractor examines your roof, they will go over all your roof’s penetrations, including plumbing vents, skylights, and chimney, to guarantee they are remaining leak-free.
The integrity of your roof flashing
Roof flashing is metal installed wherever your shingles butt-up towards a wall, in open valleys, your chimney, and other problematic areas. It is an important roofing material that every roof is required to have.
Throughout their inspection, the roofing contractor goes over all of the flashing presently installed on your roof. They are going to look for rust and make sure the stability of the flashing can still hold up to the elements.
George & Alex Roofing and Waterproofing in New York
At George & Alex Roofing and Waterproofing, we know choosing a Roofing Contractor in the New York Area is a tough job. We are here to help make it easier! Locally owned and operated, George & Alex Roofing and Waterproofing has been providing roof installation and roof repairs throughout the surrounding New York areas since 1995. With each new roofing project, we strive to provide professional, timely service at a fair price. Contact George & Alex Roofing and Waterproofing right here!